SJ-bases with a plate

A base with adjusting screws for lighting poles, masts, traffic signs and traffic lights.

The concrete base is equipped with a stainless steel adjusting and set screw mechanism. The conical shape and wide bottom of the base ensure optimal DL3 values. The top of the base is protected with weatherproof plastic, which protects the concrete reinforcements.

The delivery includes a weatherproof EPDM rubber protector (special shaped in SJ model), which is installed on the top of the pole base. The rubber protector prevents water and rocks from getting inside the base. The rubber protector does not slide off the base as the lower part of the seal is pressed between the adjusting screw and the pole. The diameter of the plastic cable entries in the pole base is 110 mm. Pole bases may be supplied with two or four cable entries.

All SJ-TER bases found on this page are equipped with a plastic cable entry.
The plastic cable entry diameter in base models SJ-4/1100, SJ-4/2200, SJ-4a, SJ-4b and SJ-4c is 90 mm.
We reserve the right to make changes to the technical specifications.

Technical information

SJ bases with a plate

Electrical number	Type	Pole diameter (mm)	Pole height (m)	h mm ± 20	d 1 mm	d 2 mm	u mm ± 10	u 1 mm	b 1 mm	b 2 mm ± 2	b 3 mm ± 2	Cable entry	Adjusting screws	Weight kg	Plate size length x width x height (mm)	Rubber protector
4607690	SJ-4a	159-224	8-12	1300	laatta	420	680	110	120	225	245	on*	6xM16	1800	1550x1550x250	JK-4
4607693	SJ-4b	159-224	8-15	1300	laatta	420	680	110	120	225	245	on*	6xM16	2200	1750x1750x250	JK-4
4607696	SJ-4c	159-224	8-15	1300	laatta	420	680	110	120	225	245	on*	6xM16	2570	1900x1900x250	JK-4
4607602	SJ-5A/1800	215-282	12-16	1300	laatta	520	730	140	120	285	300	on*	6xM16	2000	1550x1550x250	JK-5
4607604	SJ-5A/2200	222-295	16-18	1300	laatta	520	710	150	120	300	325	on*	8xM16	2000	1550x1550x250	JK-5

* Plastic

** Plastic, 90 mm

*** SJ-4/1100 with bedrock mounting. There are 10 anchor rods on the bottom of the base for casting the concrete base plate on site.

We reserve the right to make technical changes.

SJ bases with four cable entries

Electrical number	Type	Pole diameter (mm)	Pole height (m)	h mm ± 20	d 1 mm	d 2 mm	u mm ± 10	u 1 mm	b 1 mm	b 2 mm ± 2	b 3 mm ± 2	Cable entry	Adjusting screws	Weight kg	Rubber protector	dl³	Items/load
4627711	SJ-1 /4KA	100-136	1-6	1000	370	240	430	80	80	138	150	on*	3xM16	130	JK 0-1	0.22	8
4627712	SJ-1.3/4KA	100-143	5-8	1300	490	285	480	120	80	145	153	on*	4xM16	250	JK 0-1	0.60	6
4627713	SJ-2/4KA	128-168	6-10	1200	550	330	570	80	120	180	190	on*	4xM16	290	JK 2-3	0.53	4
4627714	SJ-3/4KA	128-168	6-10	1500	570	330	570	80	120	180	190	on*	4xM16	380	JK 2-3	1.23	4
4627716	SJ-4/1500/4KA	159-224	8-12	1500	620	420	690	110	120	225	245	on*	6xM16	560	JK-4	1.32	2
4627717	SJ-4/1800/4KA	159-224	8-15	1800	630	420	690	110	120	225	245	on*	6xM16	680	JK-4	2.40	2
4627719	SJ-5/1800/4KA	215-282	12-15	1800	780	520	730	140	120	285	300	on*	6xM16	1015	JK-5	3.0	1
4627720	SJ-5/2200/4KA	222-295	15-18	2150	780	520	710	150	120	300	325	on*	8xM16	1300	JK-5	5.9	1